Описание
Launch CRP129 Launch CRP129 creader pro is a fast and efficient scanner that is designed for both beginners and experienced enthusiasts. It is a comprehensive OBD2 scanner that supports reading/clearing codes and viewing live data for four main systems, as well as I/M readiness and O2 sensor tests. It works on over 40 OBD2 compliant vehicles after 2006, as well as the diesel models of 12 Voltage. Launch CRP129 can be used straight out of the box. There is no need to install any drivers or perform any setup for the device. Navigation is intuitive, with all controls clearly labeled, so you can begin diagnostics straightaway. Technical specs Launch Creader CRP129 4 Systems Diagnosis: Engine: identifies and fixes emission-related problems and ensure the engine is operating normally by reading, clearing diagnostic trouble codes, and viewing live data streams. Transmission: access and communicate with the transmission to tell you the running status of the sensors ABS: access the ABS to read and erase DTCs and view real-time data flow within the system for detailed running conditions analyzing. SRS: check airbag system to see if all the sensors and circuits of the airbag are functioning. Launch Creader CRP129 Supports All 10 OBDII Modes: Read/Erase Codes, Turn off MIL, I/M Readiness, Data Stream, Freeze Frame, O2 Sensor Test, On-board Monitor Test, EVAP System Test, and Read Vehicle Information. The Launch CRP129 reads and erases codes for almost any car made from 1996 and forward, as long as your vehicle has a 16-pin OBD2 port. If not, You will need an adapter to convert it to a 38 or 20 pin. Launch Creader CRP129 DTC Lookup And Data Recording: The built-in DTC lookup library retrieves generic (P0, P2, P3, and U0) and manufacturer-specific (P1, P3, and U1) codes, and displays their definitions Review and delete the recorded data streams, data logs, and freeze frames. To check it, go to the "Review" part on the device diagnosis menu. Launch Creader CRP129 Vehicle Coverage: